0
items
Your cart is empty
Subtotal:$0.00
:
from
to
Clear
Clear
 |  | |
RANDYS TRANSMISSION BABY MAKER 1000 |2007.5-2018 DODGE CUMMINS 68RFE|
SKU: 68RFE-C100
Vehicle Specific
Check if this part fits your vehicle.
The valve body is flat sanded to strict tolerances. Randys installs HD billet accumulators proven to prevent bore wear and provides unsurpassed sealing qualities. Sonnax accumulator plate cover with 3 additional bolts eliminating plate blowout. SSV is reamed out and Transgo switch valves are installed to correct wear and leaks. All valve body bores are vacuum tested to insure hydraulic integrity. HD billet channel plate is installed onto the valve body and torqued to our specifications preventing cross leaks which results in premature transmission failure.
Includes new O.E solenoid block.
Built and tested in house
THIS WILL NOT FIX A TRANSMISSION WITH RATIO CODES. IF YOU'RE EXPERIENCING THIS ISSUE, THE TRANSMISSION IS HURT.
Will Fit With OE Transmission Pan
Comes With:
Valve Body, Mag Hytec or Equivalent Deep Pan, Gasket, Filters, And Billet Filter Adaptor.
For 2007.5 - 2018 68RFE Transmissions Only.
To unlock the full potential of the Babymaker, it requires trans tuning.
If you do not have tuning, this will, at minimum eliminate cross leaks.
THIS IS THE INFORMATION YOUR TUNER WILL NEED TO PROPERLY TUNE FOR THE BABYMAKER:
LINE PRESSURE SET TO 225PSI ABOVE 30% THROTTLE ANGLE
100PSI RESTING PRESSURE
NO LOCKUP UNTIL 4TH GEAR
LOW/REVERSE SPRAG HOLDOUT
FOR 2019+, UNDERDRIVE PULSE TEST MUST BE TURNED OFF.
- BrandRandy's Transmissions
- This Valve Body Requires Transmission Tuning To Reach Full Potential. Do You Have Transmission Tuning?YES, NO
- ACCEPT CORE CHARGENO, I WILL SEND MINE IN FIRST., YES, I ACCEPT
- MAKE THIS A KIT!!!NO, THANKS!, YES, PLEASE! INCLUDES FLUIDS, FILTERS AND EVERYTHING NEEDED TO COMPLETE THE SWAP.
To replace this text with your store's actual shipping info, go to "Catalog -> Product tabs" and edit the Shipping info page.
We accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Catalog -> Product tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Catalog -> Product tabs" and edit the Return Policy page.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Catalog -> Product tabs" and edit the Return Policy page.